Easy to operate for a short time (0.7 seconds)
measuring the metal coating on the insulating material with a high degree of accuracy
- Insulating material on measuring the metal film in 0.7 seconds
easy to see the screen in a computer is used, calibration and easy measurement histogram, profile, such as immediately viewable, outlier detection function
Features of electrical resistance-type film thickness meter RST-231
Measuring the metal coating on the insulator in 0.7 seconds
Metal film on the insulating material (such as copper foil, plating of printed circuit board) in a short period of time (0.7 seconds) and measured with high accuracy.
Easy-to-read screen configuration
Screen is large in personal computer use, bright, easy-to-read screen configuration.
Simple calibration and measurement
Simple calibration and measurement. Two types of measurement range can be selected (2 ~ 24μm, 10 ~ 120μm).
Various views can be seen soon
After statistical processing, histogram, profile, xR control chart can be seen any time soon.
Outlier detection function
If you set the upper and lower limits of the thickness and then notifies the abnormal value.
Corresponding to the exchange for each one probe
If you have damage to the probe of the probe, can be repaired at a low price can be exchanged for every single probe.
Easy statistical processing is
The measurement data can be saved for each channel, you can set the statistics item performs a statistical processing from after to the measurement data.
It can be registered up to 40 channels
It is possible to register up to 40 channels, such as user name and part number allows you to manage the channel to a separate registration.
Corresponding to the exchange for each one probe
4 adopts the probe probe (Kelvin equation), it can also be affected by the high accuracy of the measurement without the back and the inside layer double-sided boards and multi-layer foundation.
| Probe interval | Probe tip | |
| KD-110 | 1mm | 0.1R ※ Standard |
| KD-105 | 1mm | 0.05R |
| KD-120 | 1mm | 0.2R |
| KD-210 | 2mm | 0.1R |
| KD-220 | 2mm | 0.2R |
0 nhận xét :
Đăng nhận xét