A portable compact
film thickness meter to meet the needs of the times in a short period of time measurement
Weight 2.0kg lightweight compact
at the same time the start of the measurement and put the switch, the measurement time is also within one second
by-crystal oscillation method, high stability (± 1%) high precision
because it is non-destructive total inspection can be
converted because, direct-reading unnecessary
Features of the eddy current type film thickness meter D-20
Lightweight and compact
Mobile you can.
It can be immediately measured
It can be measured at the same time and put the switch. Measurement time is also within one second.
High stability (± 1%) high accuracy
By a crystal oscillation method, high stability (± 1%) high precision.
Possible total inspection
Because it is non-destructive and can total inspection.
Without the need for conversion
Direct reading does not need to be translated at the formula.
Corresponding to various measurement
Coatings on metal, plating, painting, can be measured such as a resin (for example, oxide film on aluminum, plating such as zinc on iron, paint).
Become of dedicated measuring instrument
Only replace the scale plate, will be a variety of dedicated measuring instrument.
Measurement area 3M㎡ more
Corresponding to the measured area 3m2 more than that.
Also measured the metal coating on the non-metallic
You can measure the metal coating on the non-metal (plating on the example plastic).
Curved, spherical body, it can also be measured in the interior of the pipe
Curved surface, can also be measured in a spherical body. You can also measure the pipe such as the inner surface (more than φ12.7mm).
Judgment possible of the material difference
You can determine the material difference.
Specification of the eddy current type film thickness meter D-20
| Power supply | AA batteries 8, AC adapter when using AC100V |
| weight | 2.0kg |
| Size | 250 (W) × 186 (D) × 89 (H) mm |
| Oscillating frequency | A 107.8kHz B 431kHz C 1725kHz D 6.9MHz |
(Note) The specifications are subject to change without notice.
Probe specification of the eddy current type film thickness meter D-20
| 1. effect range of the probe during the ultra-fine probe use | Fai5mm Fai3mm |
| 2. The length of a code of probe | 900mm |
| Curved surface on the possible measured by 3. guide of type | |
| 4. type of probe | MP type ... flat uneven for a curved surface (standard) MPG type ... flat uneven for a curved surface (Guided) SM type ... flat uneven for a curved surface (ultra-fine) RP type ... concave surface, for pipe interior surface SR type ... small diameter pipe interior surface for the above-mentioned probe There are each a, B, C, 4 kinds of D by the film thickness to be measured. |
| 5. probe guide | # 180: plane measurement # 120: φ25 ~ 60mm convex curved surface measurement for # 90: φ30mm convex curved surface measurement of the following |
0 nhận xét :
Đăng nhận xét